TANK AND PIPELINE CLEARING AND CLEANING Gold Edge * Natures Edge Industrial * Gold Edge X40
NON-TOXIC * NON-HAZARDOUS * BIODEGRADABLE * MILD pH
Gold Edge™ and Gold Edge X-40™
NON-TOXIC * NON-HAZARDOUS * BIODEGRADABLE * MILD pH
Biodegradable Cleaning Solvents Heavy duty natural, biodegradable cleaning solvents developed to safely and effectively remove/dissolve/liquify heavy hydrocarbons including tar, crude, paraffins, grease, asphalt, pipe dope and many coatings from metal tanks, lines and other industrial surfaces. Gold Edge is non-flammable (flash point over 400 degrees F.), non-hazardous, contains no petroleum distillates, is water rinseable and has no VOC’s or fumes, making it ideal for use indoors or confined environments.
Our products and methods have been proven to be effective in virtually all areas of industrial and institutional maintenance including on/offshore oilfield operations, vapor suppression/equipment clearing, pipe/tank cleaning, vapor suppression, concrete washing, emergency spill clean-up, sludge and oil separation, water treatment and soil washing.
Nature’s Edge Industrial™
Surface Cleaner and Bio-Treatment. A unique multi-functional, bio-active product developed to clean hard surfaces, naturally eliminate hydrocarbon contamination wastes and suppress vapors. Nature’s Edge is a concentrated blend of non-toxic surfactants and select, naturally occurring oil-consuming microbes. Potent surfactants in Nature’s Edge break down oils, fluids and grease during the cleaning process, leaving a clean surface and promoting fast, natural degradation by the added oil consuming microbes.
Emerald Edge™
Fast Acting All-Purpose Cleaner – Developed to meet harsh cleaning demands, yet satisfy strict safety and environmental standards. A concentrated blend of non-toxic, fast drying surfactants, Emerald Edge effectively replaces dangerous caustic or butyl cleaners as well as many solvents requiring a residue free finish.
Alternative Bio-Solvents
Gold Edge
Product#300
Biodegradable cleaning and sludge liquifying solvent. Heavy duty natural, biodegradable solvent developed to safely and effectively remove and/or liquify tar, asphaltines, grease and other heavy hydrocarbons from metal tanks, lines and other industrial surfaces. Gold Edge is non-flammable (flash point above 400 degrees F.), non-hazardous, contains no petroleum distillates, is water rinseable and has no VOC’s or fumes, making it ideal for use indoors or confined environments.
Gold Edge X-40
Product#340
Extra heavy duty biodegradable cleaning and sludge liquifying solvent. A safe, biodegradable solvent developed to safely and effectively remove and/or liquify high paraffin/polymer content tar, asphaltines, grease and other heavy hydrocarbons from metal tanks, lines and other industrial surfaces. Gold Edge X-40 is non-flammable (flash point above 200 degrees F.), non-hazardous, is water rinseable and has low VOC’s.
CLEANER, VAPOR SUPPRESSANT & BIO-TREATMENT
An aqueous concentrate that reduces VOC’s/ LEL’s on contact, including H2S, SO2, pygas, mercaptans and other hydrocarbons. Also penetrates and releases layers of solid build-up while inhibiting re-adherence in lines and tanks downstream. Increases profitability, productivity and safety in production and transportation of natural gas and hydrocarbon liquids.
Sludge Liquification/Flow Enhancing
Our products and methods have been proven to be effective in virtually all areas of maintenance in the Midstream and Downstream sectors involving crude oil, natural gas, NGL’s and chemical products. Heavy hydrocarbon flow enhancing and sludge liquefying. Mitigating waste streams. Vapor suppression and elimination of LEL’s and VOC’s. Emergency spill clean-up and soil and water remediation of hydrocarbons
Gold Edge
biodegradable hydrocarbon liquefying solvent and flow enhancer product #300
Description:
Gold Edge (GE) is a biodegradable, water-rinsable solvent cleaner that contains no VOCs, produces no strong odors, and is safe for common metals. It is non-flammable and non-corrosive and liquefies heavy crude bottoms with as little as 3% by volume of
crude heel. GE knocks down LELs, VOCs, H2S, SO2, and benzene for faster and safer tank entry. GE also dissolves and removes asphalt, mastics, grease, pipe dope, and other stubborn residues from metal and other common surfaces without causing damage. As a flow enhancer, Gold Edge weakens the tensile strength and adhesion of asphaltenes in hydrocarbons, helping solids separate so oil can be recovered. In many cases, the recovered oil becomes pumpable and can be returned to inventory. Independent laboratory testing found that Gold Edge refines like a petroleum hydrocarbon at 99.89%, with no adverse effect on downstream refining.
Technical Data:
Gold Edge is a blend of naturally occurring, organic esters and surfactants. The long-chain carboxylic acids and alcohols of low volatility esters serve as softening agents for resins, polymers and asphaltenes.
Surfactants used are non-ionic and non-toxic as a result of the manufacturing process. With agitation, surface tension is released, allowing for the encapsulation, suspension and emulsification of long hydrocarbon chains. The viscosity of heavy hydrocarbon sludge is greatly reduced, permitting removal by use of pumps. As a result of the encapsulation process, reduction of VOC’s and LEL’s is achieved. After removal, surfaces can be rinsed with water if desired without need for a separate detergent rinse. Gold Edge remains with the oil (free of water) allowing the mixture to be reintroduced as an oil commodity.
Case Study:
200ft diameter crude oil tank containing very thick, foamy crude bottoms could not be pumped out even after adding significant amounts of diesel fuel as cutter stock. Only the added diesel was pumped back out. 5,000 gallons of Gold Edge was added to the tank and circulated (mechanical advantage) using the existing tanks 2” orifices surrounding the base of the tank. After three days (resonance time), 80,000 gallons of liquified crude was pumped out of the tank. The by-product was then sold as a viable oil for refining.
Conclusion:
Gold Edge is non-hazardous, non-flammable, non-toxic, non-corrosive. Safe to handle. Virtually no VOC’s or organic chlorides. Accelerates biological degradation of heavy hydrocarbons.
Gold Edge X-40
Product#340
Extra heavy duty biodegradable cleaning and sludge liquifying solvent. A safe, biodegradable solvent developed to safely and effectively remove and/or liquify high paraffin/polymer content tar, asphaltines, grease and other heavy hydrocarbons from metal tanks, lines and other industrial surfaces. Gold Edge X-40 is non-flammable (flash point above 200 degrees F.), non-hazardous, is water rinseable and has low VOC’s.
Polymer/Paraffins Removal
Gold Edge (GE), Gold Edge X40 (X40)
GE is a non-petroleum based solvent that is non-toxic, flash point above 400f degrees PMCC and will dissolve asphalt at ambient temperature. X40 is GE with select additives allowing X40 to break down and dissolve paraffin based hydrocarbons and many polymer/plasticizer materials. According to the scope of work, a protocol can be prepared whereby the products are used separately or together as a system.
Gas Suppression
Nature’s Edge products inhibit release of VOC’s from petroleum hydrocarbons, effectively lowering LEL’s and reducing risk for fires or explosions associated with spill clean-up and tank/equipment clearing/cleaning operations. Nature’s Edge incorporates cutting edge encapsulation technology to provide superior results with less agitation than similar products. Additionally, “oil-consuming” microbes are added during manufacture to reduce or eliminate hazardous components in waste discharge, lowering disposal costs and liabilities. Also available without added microbes.
Nature’s Edge VGS™
Vapor and Gas Suppression. A proprietary aqueous solution engineered to reduce VOC’s/ LEL’s; including H2S, SO2, pygas, mercaptans on contact, eliminating the need for multiple water fills, steam or extensive nitrogen purging. Penetrates and releases layers of solids from metal surfaces while inhibiting re-adherence in lines downstream. Reduces time for clearing/cleaning filter pots, caustic scrubbers, flare stack blow down tanks, acid tanks, etc. by up to 80%.
Special Features:
Reduce LEL’s / VOC’s; H2S/ SO2 gas on contact
Significant reduction in time required to clear vessels, tanks and lines
Substantially reduce nitrogen usage
Penetrate and release solids from metal surfaces
Reduce water usage and discharge
No negative effects downstream
Degrease and clean all metal and concrete surfaces
NATURE’S EDGE INDUSTRIAL™
A unique, multifunctional bio-active product designed to suppress LELs, VOCs, benzene, H2S, and SO2, clean hard surfaces, reduce hydrocarbon-contaminated waste, and control vapors. Nature’s Edge is a concentrated blend of non-toxic surfactants and select naturally occurring oil-consuming microbes. Its surfactants break down oils, fluids, and grease during cleaning, leaving surfaces clean, with no oily residue.